{ "id":966246236221, "title":"120V Metering Package","handle":"120v-metering-package", "description":"\u003cp\u003eThis metering package includes everything you need to meter 120v electrical systems and to send your meter data to the cloud.\u003cbr\u003e\u003cbr\u003ePlease customize your metering package by choosing the products you wish to order from the drop-down lists and checkboxes above.\u003c\/p\u003e\n\u003cp\u003e~section 2~\u003c\/p\u003e\n\u003cp\u003eTo simplify the ordering process, we have bundled together our individual products into a complete package for your 120V 2-wire (1 hot and 1 neutral) electrical system. The products are separated into two categories: Required and Recommended. \u003c\/p\u003e\n\u003ch3\u003eHow to Set Up and Order a Metering Package:\u003c\/h3\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"100%\" height=\"600\" src=\"https:\/\/www.youtube.com\/embed\/o4nTyPI2Cpg\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2\u003eRequired Items for a 120 Volt Metering System:\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/collections\/smart-meters\"\u003e1x EKM Omnimeter\u003c\/a\u003e: These are our universal kWh meters that are capable of accurately and reliably metering nearly any electrical system. They are perfect for your 120 Volt 2-Wire electrical system.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/collections\/current-transformers-cts\"\u003e1x Current Transformer\u003c\/a\u003e: The Current Transformer (CT) is the little donut shaped device that goes around the hot wire being read. For a 120V system, the meter will not function properly without one of these. Which CT is right for you will be determined by the diameter of your wire and the amperage of your electrical system.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2\u003eRecommended Items for a 120 Volt Metering System:\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-push3-cloud-data-system\"\u003e1x EKM Push3\u003c\/a\u003e: This is the communication gateway that sends your meter data to the cloud. It works by simply connecting it to your meter(s) and internet router. The device will instantly begin to send your meter data to the cloud. There is no setup or network configuration needed (plug and play).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-dash-software-registration-key-dashkey\"\u003e\u003c\/a\u003e\u003ca href=\"\/collections\/enclosure\"\u003e1x Meter Enclosure\u003c\/a\u003e: If you aren't mounting your meter in an existing panel or breaker box, we recommend you mount it in one of our enclosures.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-blink-rs-485-to-usb-converter\"\u003e1x USB Adapter\u003c\/a\u003e: This little adapter allows you to connect your meter directly to a computer. This is an optional connection that may not be necessary depending on your needs but it will allow you to read your meter directly with the EKM Dash, change meter settings, etc.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-inline-fuse-holder-w-1-amp-fuse\"\u003e1x Fuse Holder w\/ 1A Fuse\u003c\/a\u003e: The fuse holder is mounted inline on the hot wire that taps into the main hot line and runs to your meter. It is intended to protect the meter in case of a power surge or some other unforeseen anomaly.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/4-twisted-pairs-of-wire-cat5e-rs-485-shielded-stranded-pvc-cable-ftp-50-feet\"\u003e50ft Cat5 Cable\u003c\/a\u003e\u003cspan\u003e: This wire contains four twisted pair wires. Only one of the twisted pair wires is required for the communications side of the metering. This is the wire that will be used to connect your meter to the EKM Push and\/or the USB Adapter. If there are multiple meters in the system, they can be connected to each other in a daisy chain.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-485bee-zigbee-wireless-adapter-for-rs-485-network\"\u003e2x 485Bee Zigbee radio Nodes\u003c\/a\u003e: Install one on the meter, or string of meters, and one on the EKM Push or USB Converter, in order to establish a wireless connection between the meter(s) and the communication device. Additional 485Bee nodes can be added to strengthen the mesh network.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/12v-dc-power-supply-1000ma-ul-cul-listed-60hz\"\u003e1x 12V DC Power Supply\u003c\/a\u003e: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis can be used to power \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ea\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Push3 and\/or 485Bee radio. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eUse a 12V DC Splitter in order to power both devices with a single power supply\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/12v-power-supply-splitter-2-1x5-5mm\"\u003e1x 12V DC splitter\u003c\/a\u003e: Allows you to use a single 12V DC power supply to power two devices, like the EKM Push and 485Bee.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/ekm-insulation-piercing-connector\"\u003e2x Piercing Connectors\u003c\/a\u003e\u003cspan\u003e: These will allow you to easily tap into your hot and neutral wires, and to run wires directly to your meter. These are the wires that power the meter and give it a voltage reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/3-ft-ethernet-cable\"\u003e1x Ethernet Cable\u003c\/a\u003e: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf You are planning to use the Push3 system, you will need an Ethernet cable to connect the Push\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 gateway\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e to your internet router, if you are not planning to connect via WiFi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"p1\"\u003e\u003ca href=\"\/products\/sticker-label-sheet\"\u003eSticker Label Sheet\u003c\/a\u003e\u003cspan\u003e: Will allow you to clearly label the CT and all electrical, CT and communications wires.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2\u003eAdditional items you may need from your local electrical supplier:\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e2x Wires (16-18 AWG): These are to tap into your hot and neutral lines and then run to your meter. This is most easily done in conjunction with the Piercing Connectors listed above.\u003c\/p\u003e\n\u003cp\u003eCustomize your metering package by choosing your products from the drop-down lists and check boxes above. If you would like to order additional products that aren't available in this package, please select them from the appropriate category of the \u003ca href=\"\/pages\/hardware\"\u003eProducts Menu\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor more information about our products and services, we encourage you to visit our online \u003ca href=\"https:\/\/help.ekmmetering.com\/support\/home\"\u003eKnowledge Base\u003c\/a\u003e, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: medium;\"\u003eThe Omnimeter in conjunction with the EKM Push system provide rich real-time and historical data. The Widgets below provide a couple examples for how you can view your data.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\u003ciframe src=\"https:\/\/widget.ekmmetering.com\/EKM2\/?reads=500\u0026amp;key=MTAxMDoyMDIw\u0026amp;meter=17507\u0026amp;scale=realtime\u0026amp;bar_graph_field=kwh_tot\u0026amp;compare=0\u0026amp;total_field=kwh_tot\u0026amp;kwh_tot_cost=.18\u0026amp;kwh_currency=USD\u0026amp;timezone=America~Los_Angeles\u0026amp;historical=Green\" width=\"100%\" height=\"620\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe src=\"https:\/\/widget.ekmmetering.com\/EKM2\/?reads=30\u0026amp;key=MTAxMDoyMDIw\u0026amp;meter=17507\u0026amp;scale=dy\u0026amp;bar_graph_field=kwh_tot\u0026amp;compare=0\u0026amp;total_field=kwh_tot\u0026amp;kwh_tot_cost=.18\u0026amp;kwh_currency=USD\u0026amp;timezone=America~Los_Angeles\u0026amp;historical=Green\u0026amp;prev_scale=realtime\u0026amp;prev_reads=500\" width=\"100%\" height=\"620\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eHow to install an Omnimeter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"video-container\"\u003e\u003ciframe width=\"100%\" height=\"600\" src=\"https:\/\/www.youtube.com\/embed\/nvTTFxy_yQw\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e", "published_at":"2018-07-20T19:23:34", "created_at":"2018-07-18T15:31:04", "vendor":"EKM Metering Inc.", "type":"Bundle Product", "tags":["Type_Bundle"], "price":0, "price_min":0, "price_max":0, "price_varies":false, "compare_at_price":null, "compare_at_price_min":0, "compare_at_price_max":0, "compare_at_price_varies":true, "all_variant_ids":[9033110257725], "variants":[{ "id":9033110257725, "product_id":966246236221, "product_handle":"120v-metering-package", "title":"Default Title", "option1":"Default Title", "option2":null, "option3":null, "sku":"120-kit", "requires_shipping":true, "taxable":true, "featured_image":null,"image_id":null, "available":true, "name":"120V Metering Package - Default Title", "options":["Default Title"], "price":0, "weight":0, "compare_at_price":null, "inventory_quantity":1, "inventory_management":null, "inventory_policy":"deny", "inventory_in_cart":0, "inventory_remaining":1, "incoming":false, "next_incoming_date":null, "taxable":true, "barcode":""}], "available":true,"images":["\/\/www.ekmmetering.com\/cdn\/shop\/products\/120v-metering-package-714602.jpg?v=1580682212","\/\/www.ekmmetering.com\/cdn\/shop\/products\/120v-metering-package-545099.jpg?v=1580682212","\/\/www.ekmmetering.com\/cdn\/shop\/products\/120v-metering-package-897730.jpg?v=1580682212","\/\/www.ekmmetering.com\/cdn\/shop\/products\/120v-metering-package-436453.jpg?v=1580682212"],"featured_image":"\/\/www.ekmmetering.com\/cdn\/shop\/products\/120v-metering-package-714602.jpg?v=1580682212", "options":["Title"], "url":"\/products\/120v-metering-package"}

120V Metering Package

Price as configured: $0.00

| /

description

This metering package includes everything you need to meter 120v electrical systems and to send your meter data to the cloud.

Please customize your metering package by choosing the products you wish to order from the drop-down lists and checkboxes above.


View More

More information

To simplify the ordering process, we have bundled together our individual products into a complete package for your 120V 2-wire (1 hot and 1 neutral) electrical system. The products are separated into two categories: Required and Recommended. 

How to Set Up and Order a Metering Package:


Required Items for a 120 Volt Metering System:

1x EKM Omnimeter: These are our universal kWh meters that are capable of accurately and reliably metering nearly any electrical system. They are perfect for your 120 Volt 2-Wire electrical system.

1x Current Transformer: The Current Transformer (CT) is the little donut shaped device that goes around the hot wire being read. For a 120V system, the meter will not function properly without one of these. Which CT is right for you will be determined by the diameter of your wire and the amperage of your electrical system.


Recommended Items for a 120 Volt Metering System:

1x EKM Push3: This is the communication gateway that sends your meter data to the cloud. It works by simply connecting it to your meter(s) and internet router. The device will instantly begin to send your meter data to the cloud. There is no setup or network configuration needed (plug and play).

1x Meter Enclosure: If you aren't mounting your meter in an existing panel or breaker box, we recommend you mount it in one of our enclosures.

1x USB Adapter: This little adapter allows you to connect your meter directly to a computer. This is an optional connection that may not be necessary depending on your needs but it will allow you to read your meter directly with the EKM Dash, change meter settings, etc.

1x Fuse Holder w/ 1A Fuse: The fuse holder is mounted inline on the hot wire that taps into the main hot line and runs to your meter. It is intended to protect the meter in case of a power surge or some other unforeseen anomaly.

50ft Cat5 Cable: This wire contains four twisted pair wires. Only one of the twisted pair wires is required for the communications side of the metering. This is the wire that will be used to connect your meter to the EKM Push and/or the USB Adapter. If there are multiple meters in the system, they can be connected to each other in a daisy chain.

2x 485Bee Zigbee radio Nodes: Install one on the meter, or string of meters, and one on the EKM Push or USB Converter, in order to establish a wireless connection between the meter(s) and the communication device. Additional 485Bee nodes can be added to strengthen the mesh network.

1x 12V DC Power Supply: This can be used to power a Push3 and/or 485Bee radio. Use a 12V DC Splitter in order to power both devices with a single power supply.

1x 12V DC splitter: Allows you to use a single 12V DC power supply to power two devices, like the EKM Push and 485Bee.

2x Piercing Connectors: These will allow you to easily tap into your hot and neutral wires, and to run wires directly to your meter. These are the wires that power the meter and give it a voltage reference.

1x Ethernet Cable: If You are planning to use the Push3 system, you will need an Ethernet cable to connect the Push3 gateway to your internet router, if you are not planning to connect via WiFi.

Sticker Label Sheet: Will allow you to clearly label the CT and all electrical, CT and communications wires.


Additional items you may need from your local electrical supplier:

2x Wires (16-18 AWG): These are to tap into your hot and neutral lines and then run to your meter. This is most easily done in conjunction with the Piercing Connectors listed above.

Customize your metering package by choosing your products from the drop-down lists and check boxes above. If you would like to order additional products that aren't available in this package, please select them from the appropriate category of the Products Menu.

For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.


The Omnimeter in conjunction with the EKM Push system provide rich real-time and historical data. The Widgets below provide a couple examples for how you can view your data.

How to install an Omnimeter: