System: Single-Phase, 3-Ph. 3-Wire, or 3-Ph. 4-wire
Data: Smart Meter v.4 RS-485 Communications
Model: EKM-Omnimeter Pulse v.4
EKM-OmniMeter Pulse v.4 -- Our Most Advanced Universal Smart Meter to date, now with the ability to count pulses from up to 3 pulse-output devices, and control 2 external relays. This is truly the one meter to meet all of your metering needs!
The Omnimeter Pulse UL v.4 can count the pulses from up to 3 different pulse output devices, as is explained in this video. These could be pulses from our Pulse Output Water and Gas Meters or from any other un-powered dry contact pulse output device. Pulse Input ratios can be set in software from 1 to 9999 pulses per increment (the default ratio is now 1:1). The real-time state of the 3 Inputs can also be polled in EKM Dash software, the Omnimeter Pulse v.4 will return a High or Low state for each pin in real-time (use this for sensing switch states, open or closed doors, etc).
The Omnimeter Pulse v.4 comes with 2 controllable relay outputs. These can be controlled via RS-485, either locally or over the internet from anywhere in the world using the EKM Dash. You can set the outputs to be high or low to drive an external relay. The Relay Control Outputs can continuously provide up to 50 mA at 12 volts DC each. Control the EKM-Switch120 directly, or control lights, motors, entire buildings, implement Demand Response, Load Shedding, etc. via relay control. The Relay Control Outputs can also be set to go ON or OFF from 1 to 9999 seconds. The real-time state of the outputs can also be polled via RS485. The outputs can also be used to power an external device (Wireless 485Bee Module, sensors, etc). Please note that the relays cannot be controlled when reading the meter with the current version of the EKM Push system (Push2). You will need to be reading the meter with an EKM Blink USB Converter, iSerial, or wait for the next version of the EKM Push system (Push3).
The Omnimeter Pulse is also a revenue-grade universal kWh meter. It can meter systems ranging from single-phase 120V 2-wire or single phase 120/240V 3-wire, 120V to 480 volts, or 3-phase 3-wire 120 to 400 volts or 3-phase 4-wire 120 to 480V, 50/60Hz , 50/60 Hz. It Supports CTs from 100A to 5000A. This meter will work with any system that is commonly used in the world. Accurate to 0.5% (Class 0.5)
This meter has been accuracy tested and certified for by the State of California Department of Weights and Measures. It is California Type Approved and meets California standards for revenue grade metering. Many other states accept California Type Approval for their metering requirements.
This meter uses our full range of compact Current Transformers (you cannot meter electricity without at least one of these). The CT ratio can be set internally in the meter in order for it to work with up to 5000 amp CTs (no multiplier needed).
Use 1 CT for 120 volt single phase North American, or 230 volt 2-wire foreign systems
The Omnimeter Pulse is also great option for solar Net Metering. In addition to Total and Reverse kWh, that all of our Omnimeter models provide, these meters also provide the direction of current in real time. This makes it possible to know, in real time, if you are generating more power than you are consuming, and whether you are sending or pulling power, to or from the grid. This meter is listed by the California Solar Initiative as eligible for Performance Based Incentives (PBI). In other words, you may be eligible to earn money back from your Utility, in California and some other States, by using one these meters to monitor the performance of your solar array. Check with your local Utility to see if you are eligible.
How to install an Omnimeter Pulse v.4:
These meters are also supported by our revolutionary EKM Push system. This is our cloud-based, plug-and-play, meter data solution. We are really excited about this new system, and recommend it for most remote reading applications that use our Omnimeter models. EKM Push users can also take advantage of Encompass.io, which is our free online dashboard and meter management suite.
Encompass.io is our free online meter management platform for monitoring and managing meters. It is designed specifically for people who are remotely reading their meters via the EKM Push system. This platform can be used to visualize usage on dashboards, visualize cost, monitor trends, group meters, and a lot more. Each meter in Encompass can also be set up to email you PDF and CSV reports that you can use to monitor you meters and/or use for billing. Here is a sample PDF report:
Our Omnimeters are also fully supported by our free, remote reading, EKM Dash software. If you want to read your Omnimeter on a computer locally, without the EKM Push system, then this software is what you would use. You will also need an EKM Blink USB Converter in order to do so.
For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.
Yes, all of our electric, water, and gas meters have a pulse output. Our Omnimeters pulse at a rate of 800 pulses per kWh when set to use 200 amp CTs. The Omnimeter Pulse v.4 and the Omnimeter Pulse v.4 UL also have a settable pulse output. The settable pulse output can be from 1 to 1600 pulses per kWh. See figure 6 on the Omnimeter Pulse v.4 spec sheet for the impulse constants here: http://documents.ekmmetering.com/EKM-Omnimeter-Pulse-v.4-Spec-Sheet.pdf
i would like to submeter just 2 breakers. #1 is a 240v single phase 2 hot/1 neutral and #2 is a 120v 1 hot/shared neutral with bar with the other. Could install as normal for the 240v on the first 2 CT ports and then add a 3rd CT to the 3rd port and meter the hot from the 120v? would this work?
Yes, you can. First I would find which phase the 120 volt circuit is on. Then you can either have an Omnimeter and 2 CTs (with one of the CTs having 2 wires passing through it) or an Omnimeter with 3 CTs (2 of the CTs going to the same port on the Omnimeter). Make sure that you keep the wires that are on the same phase from the 240 volt circuit and the 120 volt circuit together. This is a little complex, so please email us and we will send you images showing what I am talking about.
Is there an IOS and/or Android app to access the EKM meters?
We do not have a standalone iOS or Android app at the moment (January 2018), but you can access your meter data on your smartphone using either the EKM Widget, or by using the EKM Push Open API html call. Please try these links in your smartphone web browser.
Considering this for a shared condo, to be able to record usage for days each person is there, and "shared" days in between. Can this info be pulled from the web app? How?
Yes, this meter, when read with the EKM Push system, will provide a record of usage for any time period you choose. The data is made available in the cloud and you can make use of it in a variety of ways. Encompass.io offers one way of determining usage for specific time periods. We also off an Open API that you can use to retrieve your data in a variety of formats.
I was wondering if the meter kept a memory of power usage when it looses power?
Yes, this meter model will store things like kWh and pulse count data for at least ten years without power. So losing power should not be an issue at all.
Will you be upgrading this meter so it can give instantaneous power as a positive (import) or negative (export)?
How far will signal go on the RS-485 connection? I have very remote applications with limited to no internet availability.
A wired RS-485 connection can go up to 4000 feet. If you need to go further you could potentially set up a a wireless connection using our 485Bee radios. With the antenna that we sell them with they are capable of about a 200m range but we've seen up to 1.5 miles, with line of sight and in ideal conditions. With an aftermarket high gain antenna, line of sight, and ideal conditions, the signal can go up to 30 miles. If that isn't enough, then you could might consider a cellular router connected to our EKM Push gateway.
I am looking for the price of meter type 4 and 4a, 1 and 3 phase. Please reply ASAP, if you have them. Thanks
I'm not sure what you mean by 4 and 4a but this meter, The Omnimeter Pulse v.4, can be used on single phase or three phase systems. Pricing for all of our products is available in our online store. If you're interested in quantities above 10 units, please contact us for quantity pricing. Send your inquiries to email@example.com
Looking for a meter with only demand KW read out from utility pulse meter.
What Model to use?
I'm not sure I understand your question. The Omnimeter Pulse v.4 has Max Demand. The meter can be set up to reset Max demand on a schedule. Please use this Contact Form if you have any other questions.
I'm looking to connect the dry kyz outputs of a ION 8650 meter to the Omnimeter Pulse v.4 to count the pulses from the kyz outputs, convert the pulses to kWh, based on pulse wait, then finally have another device fetch the data via the serial port. Can this be done with the Omnimeter Pulse V.4?
The Omnimeter Pulse v.4 has three inputs for dry contact pulse counting. In the case of a kyz system you would use two of the inputs. Or to simplify the system you could just use ky on one input. You would then need to do the conversion yourself to convert pulse counts into kWh (determined by the pulse value of each pulse from the ION 8650). So it is possible but it seems like the hard way to do what you want. The Omnimeter Pulse is also a kWh meter, so if you’re planning to use it to count pulses from another kWh meter you might consider simply installing it as a standalone metering system. You would only need to pair it with one or more Current Transformers, depending on they system you are metering, to compete the metering system. Either way, the Omnimeter can then be connected to our EKM Push gateway, which connects to your internet source, to send data to the cloud. Or you could connect the Omnimeter directly to a computer using a USB Converter.
Hi there, the relay control on these meters - Can these be set up for automated switching by programming preset thresholds etc, or are they only manually controlled?
Alternatively, is there any automated (via presets) remote controlling options via the EKM dash?
At this point there is no trigger based control option for v.4 Omnimeters using the EKM Dash. However, we do plan to add this functionality at some point in the future, though there is no definitive timeline for this addition. We have begun development on it but it is not ready for release yet.
Further down the road we also plan to add this capability through the EKM Push system as well. This also has no concrete timeline for implementation.
If I customize the display values, will this be reset if power is lost?
No, all meter settings, including display settings, will not be reset if the power is lost.
I\'m hoping to use this with the 3/4\" stainless steel pulse output flow meter. Can this omnimeter v.4 unit be powered by 12v? Also, how is the omnimeter reset?
The Omnimeter needs at least 110V to power it. This can be done by cutting the end of a standard 110V power cord, baring the ends of the two individual wires, and running the hot wire to terminal 7 and the neutral to terminal 10, on the Omnimeter. If you are also using the v.4 Omnimeter to meter electricity then the meter is powered by the electrical system that it is metering.
The Omnimeter cannot be completely reset. This is to prevent tampering when the meter is being used for revenue purposes. That being said, if you're metering electricity this meter has a secondary resettable kWh value that can be reset. The meter also has a primary kWh value that cannot be reset. If you're using the EKM Dash software to read the Omnimeter, it has a resettable pulse count value that you can use. It is also a secondary value. The primary pulse count value cannot be reset.
Will this electrical meter accept a pulse output from another electrical meter such as the EKM-25IDS? I want to monitor my home energy usage as well as the branch circuit usage to my detached garage.
Yes, you can connect up to three 25IDS meters to the pulse inputs on the Omnimeter Pulse v.4. So you should be able to accomplish what you're trying to do using the combination of these two meters.
Can separate readings for each CT and each additional pulse output device be generated from this meter to determine the electrical consumption of multiple tenants without additional meters?
The v.4 Omnimeters can count pulses on three separate inputs, so you can connect up to three water and/or gas meters to one Omnimeter Pulse v.4. This meter also provides separate kWh values for up to three electrical lines. So if your tenants are only using 120V 2-wire electrical circuits (1 hot, 1 neutral), you could meter the electrical consumption for up to three tenants with one v.4 Omnimeter. However, if your tenants have 120/240V 3-wire (2 hots, 1 neutral) then you will need to have one Omnimeter on each rental unit.
It\'s stated that the relay control output is 12V at 50 mA, is this AC or DC?