8 Digit Pulse Counter v.2

$70.00

description
The 8 digit Pulse Counter is battery powered and will count pulses from any of our pulse output Water Meters, Gas Meters, or kWh Meters, for up to 10 years.
View More

More information

Type: 8 Digit Pulse Counter

Model: PC8-v2

Battery: 10 Year Life

Input Signal: Relay or Switch Contact

Voltage Input: 0–18V

Display: 10mm LCD

Operating Temperature: -20–60ºC

Terminals: Screw Type

Reset: Front Facing Button (disable-able) or Rear Terminal

This is a well made 8 Digit Pulse Counter that will count and display pulses. These pulses could be from your Pulse Output Water Meters, or your Pulse Output Gas Meters. The Pulses reflect a usage value. For example, our 3/4 Pulse Output Water Meter pulses once for every 1/10 cubic foot (approx. 0.75 gallon) that passes through it. The pulse counter will count those pulses. As the pulse counter has an 8 digit display, it can count up to 99,999,999 pulses, or in the case of the aforementioned water meter, approximately 75 Million gallons.

The pulse counter has an internal lithium battery that will last up to 10 years.

The total pulse count can manually be reset to zero using the button on the front or via the contacts on the back of the counter. The front button can also be disabled by removing a pin jumper on the side of the counter. Refer the the spec sheet below for instructions.

Connect pulse output water and gas meters to terminals 2 (signal) and 6 (ground) on the back of the 8 Digit Pulse Counter.

The LCD screen can be backlit by supplying 5VDC to terminal 5 on the back of the pulse counter.

This Pulse Counter is not watertight and should be installed in a protected enclosure or environment to prevent damage. 

A bezel and gasket are included for mounting and a retention spring clip will hold to pulse counter in place. Bezel screws are not included.

For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.

Here is the spec sheet: 8 Digit LCD Battery Powered Pulse Counter

  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
Justin Ennis
Worked like a charm

Was able to put an easy to read display many feet and rooms away from where the meters where in this utility split.

M
Mohan Pandit
Excellent Product & Service

As always shipping was prompt. Have been using the products for 10 years now and very satisfied.

N
Norman Maret
EKM Counter

A great counter, just perfect for the product we sell.

S
Sam ammani

I have a Neptune water meter. We lost our sub meter reader while doing the demo for our coffee shop. Does this reader work with my Neptune DM 2B 31?
Thank you.

EKM Metering Inc.

Sorry I am not able to find much information about your Neptune DM 2B 31. But if your water meter or any water meter has a dry contact pulse output (2 wire reed switch pulse ouput for example), then it will very likely work with our 8 Digit Pulse counter, or our Omnimeter Pulse v.4, or our EKM ioStack.

R
Robert Riley

where do I tie in the two wires from the meter?

EKM Metering Inc.

You will want to connect the wires from your pulse output water meter or gas meter to port 2 and port 6 on the 8 digit pulse counter.

B
Brian

The PC8-v2 pulse counter, will it count a dry contact closure without dc voltage signal on it? Basically just a set of contacts closing, like you are just touching the wire terminated on #2 and #6 together? Thanks

EKM Metering Inc.

Yes, absolutely!  What you describe is exactly how the 8 digit pulse counter works with our water meters and gas meters (which both have non-powered dry contact pulse outputs)

J
Justin Brennan

Where do wires from your gas meter products connect on this counter?

EKM Metering Inc.

You will want to use terminals 2 and 6 on the EKM-PC8 v.2 pulse counter.

G
Guadalupe Rodriguez

Looking for ekm pc8 pulse counter

EKM Metering Inc.

It sounds like you might be looking for the 8 digit pulse counter that we used to offer.  It was made of light tan plastic.  We discontinued that model, because it was just not reliable enough for our customers.  We replaced it with the black 8 digit pulse counter, which is much more reliable.  So I would highly recommend you go with the new black plastic 8 digit pulse counter and not the older light tan plastic 8 digit pulse counter.

https://www.ekmmetering.com/collections/meter-reading-solutions/products/8-digit-pulse-counter