Indoor Enclosure Kit - Surface or Flush Mounting - Model EKM-IENC
This is the Indoor Enclosure Kit (EKM-IENC), designed for EKM electric meters. It will work with any of our electric meter models except the Omnimeter HV v.4 (too big) and the EKM-15E (too small).
View More
More information
Type: Indoor
Mounting: Surface Mount or Flush Mount
Dimensions: 6.75" Tall x 4.5" Wide x 2.5" Deep
Model: EKM-IENC
Our Indoor kit will give you the cleanest looking installation for any indoor application. This kit comes with both the ability to surface mount or to cut-in flush mount your electric meter.
Please note that the EKM-15E and Omnimeter HV v.4 should use one of our watertight enclosure models.
Please also note that this enclosure is not UL approved. For a UL approved installation please use one of our watertight enclosure models, all of which are UL Listed.
This is a custom designed meter case, the face of the meter is all that is left exposed, so that you can easily read the measured values off of the face of your submeter.
The kit includes both surface-mount and flush-mount covers, DIN-rail, and mounting hardware for cut-in blind flush-mounting. It also has two threaded 1/2" knockout conduit connections on the top, bottom, and back, for easy and secure conduit connections.
This enclosure kit will work with these electric meter models: Omnimeter I v.3, Omnimeter II v.3 UL, Omnimeter Pulse v.4, Omnimeter Pulse v.4 UL, and EKM-25XDSE. It will not work with the Omnimeter HV v.4 or the EKM-15E.
For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.
Spec Sheet: Indoor Enclosure Spec Sheet PDF
Works as you would expect. I got all the parts at Lowe's and installed it in a short amount of time. The company had already added the meter to my account so once I got back to the office it was already reporting. Very happy.
The unit is extremely well built. Fit & finish is flawless. However, in order to mount it, would have to do a little work to get cables in & then finally mount it. Very awkward. So, I built a U channel of wood & mounted it against that & cabled everything up in place.
Products arrived on time and well boxed. Installation has been delayed until after the new year.
Good product at a fair price
Great product
was asked to use their metering equipment by a costumer. the experiance has been great so far.
This is a great little enclosure with the emphasis on little. I used the recessed trim and it looks like it was there from the beginning. If used with an EKM 25XDSE, you will struggle with anything larger than #6 and I don't think I'd use it again unless it was #8 or smaller.
Does your enclosure come with 3/4" threaded holes? I will be using #6 AWG.
Our indoor enclosures have two threaded 1/2" knockout conduit connections on the top, bottom, and back, for easy and secure conduit connections. You can also simply use a hole saw to cut or drill your own size hole wherever desired.
For the EKM-1ENC enclosure, what is the center to center distance between the input ports on the top and bottom? Do they line up with the pass-thru ports of the enclosed meter?
Distance from center to center of the two top knockout holes is 1-5/8”. Spacing is similar to that of our pass-through style meters so that you can easily run your wires through the enclosure and the meter and back out the enclosure.
Does it meet Australian standard or used in Autralia?
This enclosure does not have any certifications related to Australian standards. I would recommend our UL Listed enclosure which may work well for your needs. We often sell them for use in Australia.
Thank You!
Please leave this popup open whilst your media is uploading
Customer Photo Gallery
Be one of the first to share photos of your installed meters! Click the button below to submit your photos and receive $10 off your next order once your post is approved!