2" Water Meter - Stainless Steel, Pulse Output

$520.00
Two inch stainless water meter

2" Water Meter - Stainless Steel, Pulse Output

$520.00
2.0" Stainless Steel Pulse Output Water Meter - SPWM-200-CF. This is a great stainless steel water meter that can be read locally, or can be set up to be read remotely when paired with an Omnimeter Pulse v.4 and an EKM Push gateway. The complete system provides your water meter data in the cloud for free! No recurring fees of any kind.

Type: 2" Stainless Steel Pulse Output Water Meter

Mounting: Horizontal Inline Mount -- 2" Male NPT Pipe Threads

Units: Cubic Feet

Pulse Output: 1 pulse = approx. 0.748 gal.

Approx. Dimensions: 17” long (overall with the threaded couplings installed) x 4.75" Wide x 6.5" tall

Model: SPWM-200-CF

Our remote readable 2.0" Stainless Steel Pulse Output Water Meters are a great solution for remotely, or locally, monitoring water consumption.

This is a well made, industrial grade, stainless steel(304 grade) water meter. You can use it as a traditional water meter where you read the water consumption off of the face of the meter. It also has the added functionality of being able to connect the pulse output wires to a pulse counting device. This meter produces a pulse for every 0.10ft³ (1 pulse = approx. 0.748 gal.) that flows by the meter, these pulses can be then picked up and counted by our pulse counting devices.

Remote Water Reading:

This meter can tell you if you have a leak in your water system, because it only takes ~6.0 pints of water leakage to generate a pulse. In other words, if you see a pattern of pulses when you shouldn't (when you aren't intentionally using water) then you probably have a leak somewhere. The number of pulses over a given period of time will tell you how severe the leak is. Identifying and fixing water leaks can save a ton of money in water costs and overage fees, not to mention mitigating the damage that any leak can cause.

This pulse output water meter can be connected to our EKM-Omnimeter Pulse v.4, which is our new pulse input meter. This is our most advanced electric meter to date. This meter can count the pulse outputs from up to 3 pulse output devices. It can also control up to 2 external relays, which allows you to turn things on and off remotely.

This water meter, when connected to a v.4 Omnimeter, can send pulse data to the cloud with our EKM Push communication system. The EKM Push sends all of your meter data to our cloud database and inserts it into your personal account, where you can access it for free. In other words, with this system you can easily monitor water use, at an unlimited number of sites around the world, for free.

Encompass.io

Encompass.io is our free online meter management platform for monitoring and managing meters. It is designed specifically for people who are remotely reading their meters via the EKM Push system. This platform can be used to visualize usage on dashboards, visualize cost, monitor trends, group meters, and a lot more. Each meter in Encompass can also be set up to email you PDF and CSV reports that you can use to monitor you meters and/or use for billing. Here is a sample PDF report:

EKM Widget

The EKM Widget offers another option for quickly seeing your water meter data online. It is also easy to save and share your Widget setting once you have it setup how you want. Here is an example:

Use these water submeters to meter the water consumption in your apartments, your irrigation water (which can save you in sewer costs in some areas), meter your well output, or use them to detect leaks while you are away.

Product Features

  • Stainless steel body and fittings
  • Simple 2-wire pulse output
  • No additional power source required
  • Pulse count can be read remotely using the free, remote reading, Encompass.io, EKM Dash desktop software, or EKM Widget.
  • Quality materials and construction, 2.0" NPT Male Threads
  • Very reasonably priced water meter, even without the pulse output

    Max Operating Pressure: ≤1MPA (PN:1.6MPa/16bar), ΔP≤0.1MPa

    For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.

    Spec Sheet: 2 inch Stainless Steel Pulse Output Water Meter Spec Sheet




    Compare water meter models: Water Meter Comparison Chart

    QUESTIONS & ANSWERS

    Ask a Question
    • What is the max pressure it can withstand (psi)?

      The maximum operating pressure of this meter model is 145 PSI.

    • What software is needed to read meter?

      I recommend that you read this support article to learn about our remote water meter metering system. It describes all of the products that are needed as well as the software options that are available.

    • What is the max flow rate that is supported?

      Maximum flow rate (Qs) for the meter model is 1059.44 ft³/hr.

    • Can your meter be installed on a vertical line?

      Our 2.0" water meters must be installed horizontally with the dials facing upwards. In order to install this meter on a vertical line, the line would need to jog horizontally for the inlet and outlet of the meter. Only our 3/4" Vertical Water meters can be installed inline on vertical water lines.

    • The SPWM-200-CF water meter. What other costs are involved and hardware to have the water data broadcast to a wi-fi so I can review from home computer?

      The other products that are needed are an Omnimeter Pulse v.4 and an EKM Push gateway. If you need to connect to your WiFi network, and cannot hardwire the EKM Push to your internet router, you will also need a WiFi Bridge. This Article explains a little more about remote water metering.

    • Can this meter measure in m3?

      All of our water meters read in cubic feet. In order to convert cubic feet to cubic meters, you will need to multiply the readout of this meter by 0.0283. So for example, if the meter shows 100 cubic feet of usage, 100 x 0.0283 = 2.83 cubic meters.

    • For a 2\" meter, what is the minimum required length of straight pipe entering and leaving the pipe for accurate readings?

      A good rule of thumb for this is to have straight lengths of pipe on the inlet and outlet of the water meter that are 10x and 5x the diameter of the pipe, respectively. So for a 2.0" water meter you would have at least 20" of straight pipe before the water meter, and at least 10" of straight pipe after the water meter. 

    • What is the accuracy of your 1-1/2 and 2-inch water meters?

      The accuracy of our water meters depends on the flow rate of the water passing through them. The spec sheets for these water meters provide accuracy information, including an error curve on the second page.
      1.5" Water Meter Spec Sheet
      2.0" Water Meter Spec Sheet

      If the flow rate remains nominal then you should be able to expect at least 1–1.5% accuracy.

    • I am looking for a water meter for a well or a water meter that feeds into a cistern.

      Any of our water meters, if appropriately sized, can be used on a well or cistern feed. If there is particulate matter in the water then it is advisable to add a filter and/or vertical drop with a clean-out before the water meter. This will ensure that the particulate mater does not flow through the meter and negatively affect it's life span.

    • Are the meters certified lead-free?

      We have no certification stating that our water meters are lead free. However, I can tell you that they are. In fact, we decided to switch from brass to stainless steel meters in order to avoid the possibility of there being any lead content in the alloy. These meters are cast from stainless steel (304 grade), which has no lead content at all.

    • What does pulse output mean?

      Pulse output provides a way for water and gas meters to be read remotely. A magnet is placed on one of the meter's dials that closes a switch when the dial completes each revolution. The closing of the switch creates a "pulse" which can be counted by a pulse counting device such as our Omnimeter Pulse v.4 or 8 Digit Pulse Counter. In other words, the pulse output provides a way of converting the analog mechanism of the water meter into digital data.  In the case of this water meter, a pulse is generated for every 0.1 cubic feet of water that flows through the meter. This is because the magnet is placed on the dial that completes a revolution for every 0.1 cubic feet that flows through the meter.