Interruptor EKM120

$113.00

descripción
El EKM-Switch120 es un cable de alimentación que conmuta 120 VCA con un voltaje de control de CC de 3,3 a 60 VCC, lo que permite controlarlo de forma remota.
View More

More information

Descripción: Regleta de alimentación conmutable remota de 120 VCA con 4 salidas.

Conexiones: Pos (+) y Neg (-) de CC de bajo voltaje, 1 macho estándar de 3 clavijas NEMA 5-15 120 VCA, 1 siempre encendido hembra estándar de 3 clavijas NEMA 5-15 120 VCA, 1 normalmente encendido hembra estándar 3 -clavijas NEMA 5-15 120 VCA, 2x normalmente apagadas Hembra estándar 3 clavijas NEMA 5-15 120 VCA

Modelo: EKM-S120

Controle 2 de estos interruptores de 120 voltios conectándolos a nuestro Omnimeter Pulse v.4 u Omnimeter HV v.5

Cada interruptor se puede controlar de forma independiente mediante una puerta de enlace Push3 y un portal de cuenta Push , o un convertidor USB y el software EKM Dash , conectándolos a la Salida 1 y la Salida 2 en el Omnimeter v.4 o v.5.

Este es un cable de alimentación que conmuta 120 VCA (hasta 15 amperios) con un voltaje de control de CC de 3 VCC a 3 mA a 12 VCC a 30 mA. ¡Este dispositivo le brinda la capacidad de encender/apagar su energía de forma remota usando un voltaje de control muy pequeño! Es lo suficientemente grande para controlar grandes cargas: bombas, luces, electrodomésticos, etc.

Es seguro:

  • Aislamiento óptico de 3 kV: elimina el riesgo de descarga eléctrica.
  • Histéresis del relé: evita la vibración del relé.
  • Protección antirrebote: prolonga la vida útil de los contactos.
  • LED: verifique el voltaje de entrada y el estado del interruptor.
  • No se requieren voltajes expuestos de 120 VCA ni cableado peligroso de 120 VCA.
  • Se enchufa en tomacorrientes domésticos estándar estadounidenses de 120 V CA de 3 clavijas, tiras de alimentación y cables de extensión.
  • Elimina la exposición a voltajes peligrosos en proyectos de bricolaje, aulas y bancos de trabajo de desarrollo.
  • Sin cableado especial de 120 VCA al implementar nuevos productos y soluciones personalizadas.
  • Puede ser instalado por usuarios no técnicos.
  • Aislamiento de 5300 Vrms del circuito de 120 VCA.
  • Un interruptor de circuito de seguridad térmica de 12 A evita sobrecargas y agrega protección adicional.
  • Un gran MOV de 3600 W sujeta sobretensiones para energía limpia

Es conveniente:

  • Se inserta fácilmente entre la fuente de alimentación y los dispositivos eléctricos con cable.
  • Conmuta hasta 15 amperios con una señal de control tan baja como 3vdc a 3ma. Ideal para usar con controladores a batería o microcontroladores.
  • Se conecta directamente a un Arduino u otro pin digital MCU sin necesidad de un transistor de controlador o un circuito de búfer.
  • La señal de control de voltaje de dos hilos se conecta al bloque de terminales (30-14 AWG).
  • El indicador LED muestra el estado de la señal de control.
  • Las unidades son "apilables" y se montan fácilmente con dos tornillos.
  • Conecte el enchufe de entrada al tomacorriente de pared o a la regleta de enchufes.
  • Conecte el receptáculo de salida a un solo dispositivo alimentado o hasta 4 dispositivos alimentados.
  • Los dispositivos de salida pueden ser aparatos o luces de 3 o 2 clavijas.
  • Conveniente conexión a tierra de seguridad disponible para poner a tierra el circuito de control externo.

Especificaciones:

  • Entrada de CA: enchufe NEMA 5-15P, estándar de 120 V CA con conexión a tierra.
  • Salida de CA: receptáculo NEMA 5-15R, estándar de 120 VCA con conexión a tierra.
  • Capacidad de conmutación: 15amps @ 120vac.
  • Esperanza de vida: el relé de control SPDT duradero tiene una clasificación de 30/40 A, 400 000 operaciones con una resistencia de 12 A. Sin carga, la vida útil estimada es de 5,3 millones de operaciones mecánicas.
  • Entrada de control: 3,3 a 60 VCC (3 a 30 mA) o 12 a 120 VCA, el bloque de terminales acepta cable #30-14 AWG.
  • Velocidad de conmutación: activación máxima de 15 ms, liberación máxima de 10 ms.
  • Aislamiento de circuito de CC a CA: 5300 Vrms.
  • Indicador: el LED indica cuando el lado de CC está energizado.
  • Protección: lado AC protegido con 150V AC MOV; El lado de CC está libre de transitorios.
  • Montaje: Dos tornillos #6. Solamente para uso en interiores.
  • Temperatura : -35ºF–145ºF

Hoja de especificaciones: Switch120 Hoja de especificaciones .pdf



Para obtener más información sobre nuestros productos y servicios, lo alentamos a que visite nuestra Base de conocimientos en línea, que proporciona hojas de especificaciones, videos, tutoriales, preguntas frecuentes, diagramas y más.

  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
R
Raj
Amazing product

This product is a game changer - and it doesn't exist anywhere else on the internet unless you make it yourself. I use it to let my marantz 7706 processor trigger this product to turn on three usb fans to cool my enclosed cabinet. Brilliant. Also there are so many applications for the "off when triggered" outlet - like turning off lighting or noise inducing devices. Well with the price of this product!!

D
Daniel Gay
Works Perfectly

I needed a switch to go with my Outback Charge controller that would take 12 volt trigger and trigger a 120 switch with enough amps to use a 1500 watt heater so when I am in float my charge controller will divert the power to the heater and help heat my garage. It works perfectly and is all condensed into a sensible product. very satisfied on the construction of the product. Nice

J
Johnny Grace

Works great, solid construction. if you included a female Zack to bare wire adapter and advertised to the home theater and audio file markets you would sell many many of these. engineers can easily cut one plug off a low voltage trigger cable, test polarity of the trigger voltage coming from the AV receiver, n connect the stripped wire to the terminals on the unit respecting polarity. a small adapter that could be ordered separately on the same page would probably cost less than a dollar in quantity and would allow any customer wanting to automate their home theater or audio file setup a snap. Great work!

R
Roman LAWNICKI

you say your device EKM-S120 is controlled by 12 v 3-30 milliamps my 12 v controll signal is milliamps. is that to much?

EKM Metering Inc.

Your question does not say how many milliamps you have.  But as long as you have more than 3 you will be ok.  You could have 1000s of milliamps and you would be ok, the switch just requires more than 3mA to operate.

I
Igor Seryapin

Will this switch work with control voltage 12VDC @500mA?

EKM Metering Inc.

Yes, if your power supplied for the control voltage provides 12VDC, and up to 500mA that should be fine.

I
Igor Seryapin

Can I use this switch with an automatic low voltage vacuum dust pan switch to turn on 110v vacuum?

EKM Metering Inc.

If you can provide the low voltage signal to turn the Switch120 on or off, it should work for what you are wanting to do.

A
Archie Sangole

If this is used with a linux platform can it be controlled via bash or shell commands to reboot e.g a serial device connected to it?

EKM Metering Inc.

The EKM Switch120 simply turns or or off a 120 VAC power supply (up to 15 amps), by using a DC control voltage of 3 VDC @ 3mA to 12 VDC @ 30 mA. So you would activate its internal on/off switch via supplying anywhere from 3-12 volt DC to its terminals. It does not turn on or off via a data connection.

Contact us directly here if you have any further questions: https://www.ekmmetering.com/pages/contact-us

c
chris

I want to use the 12-volt trigger from a Sonos Port to turn on a 70-volt amp (that unfortunately, that isn't 12-volt trigger capable). Can I use this to connect to the amps power cord and to be able to turn it on remotely using the Sonos Port trigger signal? I know it is a 12-volt trigger, but I am unsure about the current. Since this has two outputs, would I be able to control the fans in the enclosure?

EKM Metering Inc.

I am not familiar with the Sonos Port, you would have to know the amperage of the 12volt output so that we could tell you if it would work or not with the Switch120.  What do you mean by "Since this has two outputs, would I be able to control the fans in the enclosure?", I am not clear what you mean here.  Are you wanting to use the second output from the Sonos Port to control a second 120 volt load?