Portafusibles en línea EKM con fusible de 1 amperio

$11.00

descripción
Portafusibles EKM-Fuse con fusible de 1 amperio
View More

More information

Función: proteger los cables de referencia de voltaje

Tipo: Fusible de acción rápida de 1 amperio

Modelo: EKM-Fusible

Ofrecemos estos como una conveniencia. Recomendamos (y UL lo requiere) que los cables de referencia de voltaje del conductor activo estén protegidos con fusibles de 1 amperio. Estos se colocarían en línea con los cables de referencia de voltaje. Los conectaríamos en o cerca del punto de referencia (cerca del panel de interruptores en la mayoría de los casos) y luego recorreríamos la distancia hasta el medidor usando un cable más pequeño.

El portafusibles viene con un fusible de 1 amperio en su interior.

Portafusibles de 250 voltios reconocido por UL con fusible ACC de 1 amperio y 250 voltios. Tamaño de cable de 12 AWG.

Se ofrece como una conveniencia solo para nuestros clientes de medidores. Solo compre estos si también está comprando otros artículos.

Para obtener más información sobre nuestros productos y servicios, lo alentamos a que visite nuestra Base de conocimientos en línea, que proporciona hojas de especificaciones, videos, tutoriales, preguntas frecuentes, diagramas y más.

Haga clic en el enlace para descargar la hoja de especificaciones: Hoja de especificaciones del portafusibles en línea .

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
F
Fevzi Karavelioglu
Very conveient and high quality

These are very convenient to safely supply power the to meters. I have used two sets of these. I like the heavy gauge wire on these as they are appropriate with 30A & 50A breakers I used them on.

B
Benoît Dutemple

Do you have the same product for 30 amps?

EKM Metering Inc.

Sorry our fuse holders are only rated up to 20 amps. The ones we sell come with 1 amp fuses.

M
Mark Patel

Which UL standard requires the use of a fuse? And is the included fuse a slow blow type?

EKM Metering Inc.

Our Omnimeter II v.3 UL and the Omnimeter Pulse v.4 UL are both UL Listed to 61010-1, they both require a fuse on each hot line for a proper UL install.  The inline fuse we supply is a 1 amp fast acting fuse: https://www.ekmmetering.com/collections/accessories/products/ekm-inline-fuse-holder-w-1-amp-fuse

You should install the fuse near the breaker or the source of the voltage reference, then run a longer wire to connect to the voltage reference inputs on the Omnimeter.

https://documents.ekmmetering.com/EKM-Omnimeter-II-UL-v3-spec-sheet.pdf
https://documents.ekmmetering.com/EKM-Omnimeter-Pulse-UL-v4-Spec-Sheet.pdf

G
GORDON ERCKMAN

Is the meter glass waterproof?

EKM Metering Inc.

Hello, which meter are you referring to?  This question is asked on the Inline Fuse Holder page.

Our water meters and gas meters are water resistant, but our electric meters are not.  If you want to install an electric meter outdoors you can put it inside a watertight enclosure: https://www.ekmmetering.com/collections/enclosure

J
James Sybrandy

The description say that these fuses are rated for 250 Volts. I have a 480 Volt system. Do you have fusing to protect the 480 Volt system? It is 3 phase 4 wire

EKM Metering Inc.

At the very least you will want to use 480 volt rated internal fuses (rather than the 250 volts that the internal fuse that we sell is rated for). The fuse holder has a 500 volt insulation resistance, but they are also only rated to 250 volts.  We do not carry 480 volt rated fuses and fuse holders. Here is the spec sheet (https://documents.ekmmetering.com/EKM-Inline-Fuse-Holder-Spec-Sheet.pdf) for the fuse holder and fuse that we carry.

A
Admin

What gauge the wires on the ends of the fuse holder?

EKM Metering Inc.

The wire is 12 AWG. Here is the spec sheet (https://documents.ekmmetering.com/EKM-Inline-Fuse-Holder-Spec-Sheet.pdf) for the fuse holder.