EKM Inline Fuse Holder With 1 Amp Fuse

$ 132.00

description
EKM-Fuse Fuse Holder with 1 Amp Fuse
View More

More information

Function: Protect the Voltage Reference Wires

Type: Fast Acting 1 Amp Fuse

Model: EKM-Fuse

We offer these as a convenience. We recommend (and UL requires) that the hot lead voltage reference wires be fuse protected with 1 amp fuses. These would be placed inline with with voltage reference wires. We would connect these at or near the point of reference (near the breaker panel in most cases) and then run the distance to the meter using smaller wire.

The fuse holder comes with a 1 amp fuse inside.

UL Recognized 250 volt Fuse Holder with 1 amp 250 volt ACC fuse. 12AWG wire size.

Offered as a convenience for our meter customers only. Please only purchase these if you are also buying other items.

For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.

Click the link to download the spec sheet: Inline Fuse Holder Spec Sheet.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
F
Fevzi Karavelioglu
Very conveient and high quality

These are very convenient to safely supply power the to meters. I have used two sets of these. I like the heavy gauge wire on these as they are appropriate with 30A & 50A breakers I used them on.

B
Benoît Dutemple

Do you have the same product for 30 amps?

EKM Metering Inc.

Sorry our fuse holders are only rated up to 20 amps. The ones we sell come with 1 amp fuses.

M
Mark Patel

Which UL standard requires the use of a fuse? And is the included fuse a slow blow type?

EKM Metering Inc.

Our Omnimeter II v.3 UL and the Omnimeter Pulse v.4 UL are both UL Listed to 61010-1, they both require a fuse on each hot line for a proper UL install.  The inline fuse we supply is a 1 amp fast acting fuse: https://www.ekmmetering.com/collections/accessories/products/ekm-inline-fuse-holder-w-1-amp-fuse

You should install the fuse near the breaker or the source of the voltage reference, then run a longer wire to connect to the voltage reference inputs on the Omnimeter.

https://documents.ekmmetering.com/EKM-Omnimeter-II-UL-v3-spec-sheet.pdf
https://documents.ekmmetering.com/EKM-Omnimeter-Pulse-UL-v4-Spec-Sheet.pdf

G
GORDON ERCKMAN

Is the meter glass waterproof?

EKM Metering Inc.

Hello, which meter are you referring to?  This question is asked on the Inline Fuse Holder page.

Our water meters and gas meters are water resistant, but our electric meters are not.  If you want to install an electric meter outdoors you can put it inside a watertight enclosure: https://www.ekmmetering.com/collections/enclosure

J
James Sybrandy

The description say that these fuses are rated for 250 Volts. I have a 480 Volt system. Do you have fusing to protect the 480 Volt system? It is 3 phase 4 wire

EKM Metering Inc.

At the very least you will want to use 480 volt rated internal fuses (rather than the 250 volts that the internal fuse that we sell is rated for). The fuse holder has a 500 volt insulation resistance, but they are also only rated to 250 volts.  We do not carry 480 volt rated fuses and fuse holders. Here is the spec sheet (https://documents.ekmmetering.com/EKM-Inline-Fuse-Holder-Spec-Sheet.pdf) for the fuse holder and fuse that we carry.

A
Admin

What gauge the wires on the ends of the fuse holder?

EKM Metering Inc.

The wire is 12 AWG. Here is the spec sheet (https://documents.ekmmetering.com/EKM-Inline-Fuse-Holder-Spec-Sheet.pdf) for the fuse holder.