3/4 Inch Water Meter - Stainless Steel, High Definition Pulse Output


Qty Price (USD)
1 - 9 $110.00
10 - 19 $102.85
20 - 49 $91.85
50 - 99 $80.85
100 - + $69.85

3/4" Stainless Steel High Definition Pulse Output Water Meter - SPWM-075-HD. This is a great stainless steel water meter that can be read locally, or can be set up to be read remotely when paired with an Omnimeter Pulse v.4 and an EKM Push3 gateway.

The complete system provides your water meter data in the cloud for free! No recurring fees of any kind.
View More

More information

Type: 3/4" Stainless Steel, High Definition Pulse Output, Water Meter

Mounting: Horizontal Inline Mount -- 3/4" Male NPT Pipe Threads

Units: Cubic Feet

Pulse Output: 1 Pulse Per 1/100 cubic foot (approx. 0.075 gallon)

Model: SPWM-075-HD

Our remote readable 3/4" Stainless Steel Pulse Output Water Meters are a great solution for remotely, or locally, monitoring water consumption.

This is a well made, industrial grade, stainless steel (304 grade) water meter. You can use it as a traditional water meter where you read the water consumption off of the face of the meter. It also has the added functionality of being able to connect the pulse output wires to a pulse counting device. This meter produces a pulse for every 0.01 cubic foot (approx. 0.075 gallon, or 0.283 liters) that flows by the meter, these pulses can then be counted by one of our pulse counting devices. The pulse output wires can be extended up to 10,000 ft.

This meter is designed to generate pulses at a high rate to provide high granularity data when set up to read with a computer. This high granularity can provide better insights into usage patterns. In particular, it can tell you if you have a leak in your water system, because it only takes ~0.6 pints of water leakage to generate a pulse. In other words, if you see a pattern of pulses when you shouldn't (when you aren't intentionally using water) then you probably have a leak somewhere. The number of pulses over a given period of time will tell you how severe the leak is. Identifying and fixing water leaks can save a ton of money in water costs and overage penalties, not to mention mitigating the damage that any leak can cause.

This meter is not NSF 61 certified. For an NSF 61 certified model, please take a look at our SPWM-075-HD-NSF.

Remote Water Reading: 

 This pulse output water meter can be connected to our EKM-Omnimeter Pulse v.4, which is our new pulse input meter. This is our most advanced electric meter to date. This meter can count the pulse outputs from up to 3 pulse output devices. It can also control up to 2 external relays, which allows you to turn things on and off remotely.

This water meter, when connected to a v.4 Omnimeter, can send pulse data to the cloud with our EKM Push3 data system. The Push3 sends all of your meter data to our cloud database and inserts it into your personal account, where you can access it for free. In other words, with this system you can easily monitor water use, at an unlimited number of sites around the world, for free.


Encompass.io is our free online meter management platform for monitoring data, managing meters, generating bills, and more. It is designed specifically for people who are remotely reading their meters via the Push3 system. This platform can be used to visualize data on customizable dashboards, visualize cost, monitor trends, group meters, and a lot more. Each meter and meter group in Encompass can also be set up to email you, and/or your tenant, PDF bills. Here is a sample PDF water bill:

EKM Widget

The EKM Widget offers another option for quickly seeing your water meter data online. It is also easy to save and share your Widget setting once you have it setup how you want. Here is an example:

Use these water submeters to meter the water consumption in your apartments, your irrigation water (which can save you in sewer costs in some areas), meter your well output, or use them to detect leaks while you are away.

Product Features

  • Robust cast stainless steel body and fittings
  • Blue plastic cover protects the meter face from damage
  • Simple 2-wire connection between water meter and kWh meter
  • No additional power source required
  • Pulse count can be read remotely using the free, remote reading, Encompass.io, EKM Dash desktop software, or EKM Widget.
  • Quality materials and construction, 3/4" NPT male threaded fittings
  • Very reasonably priced water meter, even without the pulse output
  • Max Operating Pressure: 140 psi

For more information about our products and services, we encourage you to visit our online Knowledge Base, which provides spec sheets, videos, tutorials, FAQs, diagrams, and more.

Spec Sheet: 3/4 inch, Stainless Steel, High Definition Pulse Output, Water Meter Spec Sheet .pdf

Compare water meter models: Water Meter Comparison Chart


Ask a Question
  • Can you specify the 3 wires it has and what they do?

    The red and the white wires are both switch closure wires. The black wire is the common ground wire. You can use the combination of the black/white or black/red in order to count the "pulses" generated by the switch closure. For this meter the pulse output happens for every 0.01 cubic feet of water that pass through the meter. The pulse output wires can be connected to the Omnimeter Pulse v.4 and EKM Push gateway in order to read the water meter remotely over the internet.

  • Is this meter compatible with deionized water?

    Yes, all of our water meters are compatible with deionized water.

  • They are available in Europe at m³?

    I sorry, we do not supply water meters that measure in Cubic Meters.  But if you do find a water meter that measures in cubic meters which has a dry contact pulse output, you can use it with our remote pulse counting system (the Omnimeter Pulse v.4 paired with our EKM Push system)

  • what is the output voltage and current of pulse generated by the switch closer through 2-wire reed switch and 3-wire switch?

    Thanks for your inquiry. Our water meters (and gas meters) have a basic, non-powered, Reed Switch, 2-wire, open/close pulse output. Your reader device will need to put a low voltage on the line and sense when the circuit closes at the water meter end. One close of the circuit = 1/10th cubic feet of water.

    We recommend no higher than 20mA and 24V for reading the pulse on all our water and gas meters.

    If you are using our Omnimeter Pulse v.4, or our EKM-PC8 pulse counter, these devices will supply this low voltage to the water meter's pulse circuit.

    For more questions, please contact us direct here: https://www.ekmmetering.com/pages/contact-us

    Best regards,

    EKM Metering

  • Is the remote reader powered by a battery? If so, can the battery be replaced?

    Yes, we do have our 8 digit battery powered pulse counter on our website here:  https://www.ekmmetering.com/collections/accessories/products/8-digit-pulse-counter

    It can be used to count the pulses from your water meter or gas meter.

    This unit has a 10 year battery life.  The battery is soldered into place.  If you are handy and are handy with a soldering iron the battery could be replaced with some effort.  It is not designed to have the battery be replaced, so this would be a bit of a DIY project.

  • Are there 2 Reed switches where the dial/magnet passes through? I assume yes because I get pulses every time the dial passes either side of the switch. Is the Reed switch or switches, normally open and if so, how does it account for a situation where the dial can sit directly in the "closed" position when the water is turned off or no longer flowing? I am curious if there is a mechanism to account for false positive rise in voltage because the dial/magnet just so happens to sit in a direct position where the Reed switch is actuated into the close position making contact for current to pass as a "pulse".

    Yes, for our high definition water meters, the pulse output module contains 2 dry contact reed switches. One reed switch is connected to the white wire and the red wire, the other reed switch is connected to the white wire and the black wire.  We generally only recommend you connect your pulse counting device to the white wire (ground) and the red wire, we advise you to ignore the black wire.  See section V. of the spec sheet.

    Yes, the reed switches are normally opened.  Every time the dial with a magnet on it makes a full rotation, it closes the reed switch.  The reed switch can remain closed for an infinite period of time if water stops flowing through the water meter.  As long as you only count the rising edge of the pulse and account for debounce, you should not see extraneous pulses.

    If you have a situation where water can flow forwards and backwards through the water meter, this could produce too many pulses.  This is best solved with the use of a check valve to ensure that water only flows in one direction through the water meter.

    Ideally the water would flow from the source, to a valve, then to a T-drop or filter (to clean out sand and grit), then to a check valve, then to the water meter.

  • Can this meter be mounted outdoors in the ground covered with a standard irrigation box?