Voltage: 120/240 volts 3-wire
Amperage: up to 100 amps
Type: Pass-Through, Single-Phase, 60Hz
Data: Smart Meter v.2 RS-485 Communications
Model: EKM-25IDS-N v.2
Model EKM-25IDS-N v.2
Read Total kWh, Reverse kWh (for renewable energy generation), Voltage, Current (Amps), Power (Watts), Power Factor (Cos ϴ). Also, 6 months of monthly reads with Time-of-Use data is stored on board the meter and is readable remotely.
Revenue Grade 1% accurate. This is a very precise and economical meter.
Read One to 256 of these meters from across town or across the world with our FREE EKM Reader software.
These kWh meters are an elegant combination of simplicity and sophistication.
State-of-the-art electronic design with on-board data storage and built-in RS-485 networking capability--Simple, 2-wire daisy chain connection.
Same specifications as the Basic EKM-25IDS but with the addition of Smart remote reading capability.
Compact, very easy to install design. Convenient DIN-rail mounting. Pass your wires through the 3/8+" diameter tubes in the meter body. Then tighten down the 2 piercing taps to pick up a voltage reference and to power the meter. Draws less than 1 watt--to power the meter.
Non-resettable LCD display. Usage data is maintained through power outages. Will retain it's meter reads for up to 10 years without power.
Single-phase energy meter for 120/240 Volt, 3-wire, 100A 120/240-volt, 3-wire, 60Hz
Works with standard North American household current. Most commonly a white neutral, 1 black hot and 1 red hot wire, 200V to 252V between the hot wires, 110V to 126V from either hot wire to neutral. Very voltage tolerant--the meters will tolerate voltages from 168 V to 312V hot to hot, 84V to 156V hot to neutral !!
EKM-25IDS-N Spec Sheet: EKM-25IDS-N Spec Sheet
Installation instructions: EKM-25IDS-N Installation
